Fumoto Oil Drain Valve - Nissan Rogue Sport Forum
LinkBack Thread Tools
post #1 of 4 (permalink) Old 01-12-2019, 08:43 PM Thread Starter
Junior Member
Join Date: Jan 2019
Posts: 7
Fumoto Oil Drain Valve

Does anyone use a Fumoto Oil Drain Valve? Fumoto specified their part F103SX but said that it may not work if my 2017 Rogue Sport has recessed drain port and if "it only points toward the ground." I'm not sure what other direction you would want it to point in.
Tommymills is offline  
post #2 of 4 (permalink) Old 01-12-2019, 09:25 PM
Junior Member
Join Date: Nov 2018
Posts: 11
The difficult (tedious?) part of the oil change is removing the dozen or so plastic retainers holding up the underguard. Drain plug is probably the least of your worries.
YS78 is offline  
post #3 of 4 (permalink) Old 01-17-2019, 06:29 AM
Join Date: Aug 2018
Posts: 91
I'm not sure I have the patience if the flow is slow. Never had one. YS78 is correct. The engine underguard is PITA. At the dealer w/the car on the hoist, the techs only remove the rear/side retainer plugs. Not the front ones. Let the shield hang down that way. I can't do this trick on ramps. Oil changes are a breeze w/the Nissan.
Sparky is offline  
post #4 of 4 (permalink) Old 06-03-2019, 04:59 PM
Join Date: Sep 2018
Posts: 34
This will completely suck pan dry on my 2018 model. I will not be removing the sump plug going forward.

iceflow is offline  

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome