Nissan Rogue Sport Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
56 Posts
I checked the air filter right after I picked it up from the dealer a 2019 S model with 21K on the clock - a former rental unit that saw some use. I replaced the engine air filter and had nothing but grief getting the resonator back on properly. I just couldn't get the parts that formed the front of the filter housing to fit. I took it apart twice and the second time broke the plastic clips that latch the resonator to the ait intake. These two parts are now held together with a sheet metal screw. The second attempt finally got the two parts properly mated after I noted the fact as outlined by SportsNut76 above - the groove and notch have to mate up. This whole mess was the fact that I did this job in the darkness of my garage, with a flashlight as my sole source of light, in a New England January.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top